|
|
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
|
|
|
1/2" Superflexible
Foam Dielectric |
||||||||||||||||||
|
Characteristics |
|
Electrical |
Mechanical |
||
|
Impedance, ohms |
50 ± 1 |
Outer Conductor |
Copper. |
|
Maximum Frequency, GHz |
10.2 |
Inner Conductor |
Copper-Clad Aluminum |
|
Velocity, percent |
81 |
Diameter over Jacket, Standard jacket in (mm) |
0.52 (13.2) |
|
Peak Power Rating, kW |
15.6 |
Diameter over Jacket, fire-retardant jacket in (mm) |
0.53 (13.5) |
|
dc Resistance, ohms/1000 ft (1000 m) |
0.82 (2.69) 1.00 (3.28) |
Diameter over Cooper Outer Conductor, in (mm) |
0.48 (12.2) |
|
dc Breakdown, volts |
2500 | Diameter Inner Conductor, in (mm) | 0.142 (3.6) |
|
Jacket Spark, volts RMS |
5000 |
Minimum Bending Radius, in (mm) |
1.25 (32) |
|
Capacitance, pF/ft (m) |
25.2 (82.7) |
Number of Bends, minimum (typical) |
20 (50) |
|
Inductance, µH/ft (m) |
0.0625 (0.205) |
Bending Moment, lb-ft (N•m) |
2.0 (2.7) |
|
Cable Weight, lb/ft (kg/m) |
0.14 (0.21) | ||
|
Tensile Strength, lb (kg) |
175 (80) | ||
|
Flat Plate Crush Strength, lb/in (kg/mm) |
110 (1.9) |
|
Connectors |
 |
 |
 |
 |
 |
 |
 |
| Interface | Description | Type Number |
Inner
Contact Attachment |
Outer
Contact Attachment |
Plating Code |
Max.
Length in (mm) |
Max. Dia. in (mm) |
|
N Male |
Hex Head | F4PNMV2-H | Solder | Crush-Flare | BS | 2.13 (54.0) | 0.94 (23.8) |
| N Male | Hex Head | F4PNMV2-HC | Captivated | Crush-Flare | SG | 2.13 (54.0) | 0.94 (23.8) |
| N Male |
Rt Angle Hex Head |
F4PNR-H | Solder | Tab-Flare | SG | 3.3/1.5 (84/38) | 0.86 (21.8) |
| N Male | - | F4PNR-HC | Captivated | Crush-Flare | SG |
2.8/1.6 (71.9/41.5) |
1 (25.7) |
| N Female | - | F4PNF | Solder | Self-Flare | SG | 2.3 (53.3) | 0.88 (22.4) |
| N Female | Bulkhead | F4PNF-C | Captivated | Self-Flare | SG | 2.3 (53.3) | 0.88 (22.4) |
| N Female | Outdoor Use | F4PNF-BH | Solder | Self-Flare | SG | 2.0 (50) | 0.95 (24.1) |
| 4.1/9.5 DIN Male |
Right Angle Hex Head |
F4PKM-C | Captivated | Self-Flare | SS |
2.3/1.5 (57/38) |
0.95 (24.1) |
| 4.1/9.5 DIN Male | - | F4PKR-C | Captivated | Self-Flare | SS | 1.98 (50.2) | 0.95 (24.1) |
| 7-16 DIN Male | - | F4PDMV2-C | Captivated | Crush-Flare | SG | 2.10 (53.4) | 1.05 (26.7) |
| 7-16 DIN Male | Right Angle | F4PDMV2 | Solder | Crush-Flare | SG | 2.4/1.8 (61/46) | 1.05 (26.7) |
| 7-16 DIN Male | Right Angle | F4PDR | Solder | Self-Flare | SS | 2.1/2.0 (53/50) | 1.4 (35.6) |
| 7-16 DIN Male | - | F4PDR-C | Captivated | Self-Flare | SS | 1.85 (47) | 1.4 (35.6) |
| 7-16 DIN Female | - | F4PDF-C | Captivated | Self-Flare | SS | 2.0 (50) | 1.1 (27.9) |
| 7-16 DIN Female | F4PDF | Solder | Self-Flare | SS | 2.0 (50) | 1.1 (27.9) | |
| 7-16 DIN Female | Bulkhead | F4PDF-BH | Solder | Self-Flare | SS | 2.01 (51.1) | 1.50 (38) |
| 7-16 DIN Female | Panel Mount | F4PDF-PM | Solder | Self-Flare | SS | 2.01 (51.1) | 1.26 (32) |
| 7-16 DIN Female | Bulkhead | F4PDF-BHC | Captivated | Self-Flare | SS | 2.0 (50) | 1.8 (45.7) |
| 7-16 DIN Female | Panel Mount | F4PSR-PMC | Captivated | Self-Flare | SS | 2.0 (50) | 1.3 (33) |
| 7/8" EIA Flange | - | 44ASR | Solder | Tab Flare | BS | 3.3 (84) | 1.4 (35.6) |
| UHF Male | - | 44ASP | Solder | Tab Flare | BS | 2.1 (53) | 0.84 (21.3) |
| UHF Female | - | 44ASU | Solder | Tab Flare | BS | 2.3 (58) | 0.84 (21.3) |
| HN Male | - | 44ASJ | Solder |
Tab Flare |
BB | 2.4 (61) | 0.84 (21.3) |
| SC Male | - | 44SPCW | Solder | Tab Flare | SG | 2.7 (69) | 0.88 (22.4) |
|
Accessories |
| Description | Type No. |
|
Standard Hanger Kit, of 10. Recommended maximum spacing is 3-ft (1 m) |
43211A |
| Snap-in Hanger Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft (1 m). | 206706A-1 |
| Support Hoisting Grip.
Use at 200-ft (60 m) intervals. Grip with one clamp Support clamp kit of 10 |
F4SGRIP F4SGRIP-4IK |
| Standard Hoisting Grip. Use at 200-ft (60m) intervals. | 43094 |
|
Grounding and Surge Protection |
| Description | Type No. | |
|
Standard Grounding Kits Factory attached one-hole lug, (24") lead Factory attached two-hole lug, (24") lead Field attached one-hole lug (36") Field attached two-hole lug (36") |
204989-1 241088-1 204989-21 241088-6 |
|
| Weatherproofing | ||
| LDF5 to FSJ4 LDF6 to FSJ4 LDF7 to FSJ4 |
WS-L5F4 WS-L6F4 WS-L7F4 |
|
| Cold Shrink™ Weatherproofing Kit | ||
| 1/2" Coax N connector to
1/2" Coax N connector 5/8" Coax to 1/2" Coax 7/8" Coax to 1/2" Coax 1 1/4" Coax to 1/2" Coax 2 1/4" Coax to 1/2" Coax 2 1/4" to 1-1/2" Omni/Panel base Type N or DIN |
241474-4 241475-13 241475-9 241475-5A 241575-8 241548-8 |
|
| Connector/Splice Weatherproofing Kit | 221213 | |
| Entry Systems | 4" Boots | 5" Boots |
| Standard Cable Entry
Boots One Hole: Two Hole: Four Hole: |
204679A-5 204679A-7 204679A-16 |
48939A-6 48939A-8 48939A-17 |
| Tools | ||
| EASIAX® Plus Automated Cable Prep Tool (V2 connectors only) EASIAX® Cutting Tools FSJ4/FSJ1 EASIAX® Cutting Tools FSJ4/FSJ2 Cable Flare Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench |
CPT-F4B 207865 241372 224363 244377 244379 |
|
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
