|
|
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
|
|
LDF2-50 Ohm |
|
Foam Dielectric Cables
Their lower density foam allows higher
velocities and provides lower attenuation than FSJ cables. Attenuation
characteristics approach those of air dielectric cables. |
|
3/8" Foam Dielectric, LDF2-50
|
||||||||||||||||||
|
Characteristics |
|
Electrical |
Mechanical |
||
|
Impedance, ohms |
50 ± 1 |
Outer Conductor |
Copper. |
|
Maximum Frequency, GHz |
13.5 |
Inner Conductor |
Copper-Clad Aluminum |
|
Velocity, percent |
88 |
Diameter over Jacket, in (mm) |
0.44 (11) |
|
Peak Power Rating, kW |
15.6 |
Diameter Copper Outer Conductor, in (mm) |
0.38 (9.7) |
|
dc Resistance, ohms/1000 ft (1000 m) |
1.06 (3.48) 0.87(2.85) |
Diameter Inner Conductor, in (mm) |
0.122 (3.1) |
|
dc Breakdown, volts |
2500 |
Minimum Bending Radius, in (mm) |
3.75 (95) |
|
Jacket Spark, volts RMS |
5000 |
Number of Bends, minimum (typical) |
15 (60) |
|
Capacitance, pF/ft (m) |
23.0 (75.85) |
Bending Moment, lb-ft (N•m) |
1.4 (1.9) |
|
Inductance, µH/ft (m) |
0.058 (0.19) |
Cable Weight, lb/ft (kg/m) |
0.08 (0.12) |
|
Tensile Strength, lb (kg) |
250 (113) | ||
|
Flat Plate Crush Strength, lb/in (kg/mm) |
110 (2.0) |
| Connectors | ||
 |
 |
 |
 |
 |
 |
| Interface | Description | Type Number |
Inner
Contact Attachment |
Outer
Contact Attachment |
Plating Code |
Max.
Length in (mm) |
Max. Dia. in (mm) |
|
N Male |
Hex Head |
L2PNM-H |
Solder |
Self-Flare | SG | 2.1 (53) | 0.94 (23.9) |
|
N Male |
Hex Head |
L2PNM-HC |
Captivated |
||||
|
N Female |
- |
L2PNF |
Solder |
2.4 (61) | |||
|
N Female |
Bulkhead |
L2PNF-BH |
0.88 (22.4) | ||||
|
4.1/9.5 DIN |
- |
L2PKM-C |
Captivated |
SS | 1.9 (48) | 0.95 (24.1) | |
|
4.1/9.5 DIN |
- |
L2PKM |
Solder |
||||
|
4.1/9.5 DIN |
Right Angle |
L2PKR-C |
Captivated |
2.0/1.5 (50/38) | |||
| 7-16 DIN Male | - | L2PDM-C | 1.9 (48) | 1.1(27.9) | |||
| 7-16 DIN Female | - | L2PDF-C | 1.4 (35.6) | ||||
| 7-16 DIN Female | Panel Mount | L2PDF-PMC | 1.25 (31.8) | ||||
| UHF Male | - | L42P |
Solder |
BB | 2.3 (58) | 0.68 (17.3) | |
| UHF Female | - | L42U | BG | 0.91 (23.1) | |||
| SMA Male | - | L42WS | 2.2 (56) | 0.68 (17.3) | |||
| TNC Male | - | L42EWT | NG | 2.1 (53) | |||
| TNC Female | - |
L42ENT |
1.9 (48) |
|
Accessories |
| Description | Type No. |
|
Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). |
11662-3 |
|
Angle Adapter , for insulated hanger |
40430-1 |
|
Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) |
40417 |
|
Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) |
CT-K350 |
|
Velcro Cable Ties , Black, 8 inch. Indoor UseKit of 10 Kit of 50 Kit of 100 |
VCT8-10 VCT8-50 VCT8-100 |
|
Support/Hoisting Grip . Use at 200-ft (60m) intervals.Grip with one clamp Support clamp kit of 10 |
L2SGRIP L2SGRIP-2IK |
|
Grounding and Surge Protection |
| Description | Type No. |
| Standard Grounding Kit | |
| Factory attached one-hole lug, 24" lead Factory attached two-hole lug, 24" lead Field attached one-hole lug, 36" lead |
223158 223158-2 223158-3 |
| Weatherproofing | |
|
Cold Shrink Weatherproofing Kit |
241475-10 241475-13 241475-9 241548-5A 241475-8 241548-8 241548-9 |
| Connector/Splice Weatherproofing Kit | 221213 |
|
Entry Systems |
|
|
Standard Cable Entry Boots |
204679A-19 48939A-16 |
|
Tools EASIAX® Plus Automated Cable Prep Tool: DIN Connector N Connector DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench |
CPT-E2L2DIN CPT-E2L2N 244377 244379 |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
