|
|
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
|
|
|
1/2" Foam Dielectric, |
||||||||||||
|
Characteristics |
|
Electrical |
Mechanical |
||
|
Impedance, ohms |
75 ± 3 |
Outer Conductor |
Copper. |
|
Maximum Frequency, GHz |
10 |
Inner Conductor |
Copper-Clad Aluminum |
|
Velocity, percent |
88 |
Diameter over Jacket, in (mm) |
0.63 (16) |
|
Peak Power Rating, kW |
26 |
Diameter over Copper Outer Conductor, in (mm) |
0.55 (14) |
|
dc Resistance, ohms/1000 ft (1000 m) |
1.15 (3.77) 0.58 (1.90) |
Minimum Bending Radius, in (mm) |
5 (125) |
|
dc Breakdown, volts |
4000 |
Number of Bends, minimum (typical) |
15 (40) |
|
Jacket Spark, volts RMS |
8000 |
Bending Moment, lb-ft (N•m) |
2.8 (3.8) |
|
Capacitance, pF/ft (m) |
15.4 (50.5) |
Cable Weight, lb/ft (kg/m) |
0.14 (0.21) |
|
Inductance, µH/ft (m) |
0.087 (0.284) |
Tensile Strength, lb (kg) |
200 (90.7) |
|
Flat Plate Crush Strength, lb/in (kg/mm) |
110 (2.0) |
| Connectors |
 |
 |
| Interface | Description | Type Number |
Inner
Contact Attachment |
Outer
Contact Attachment |
Plating Code |
Max.
Length in (mm) |
Max. Dia. in (mm) |
|
N Male |
50 W Mating Pin |
L4NM-7550-H |
Solder | Self Flare | BB | 2.5 (64) | 0.94 (23.8) |
|
N Male |
70 W Mating Pin | L4NM-7550-H | Solder | Self Flare | BB | 2.5 (64) | 0.94 (23.8) |
|
N Male |
50 W Mating Pin | L4NR-7550 |
Solder |
Self Flare | NB | 3.2/1.5 (81/38) |
0.95 (24.1) |
| Right Angle | - | - | - | - | - | - | |
|
N Female |
50 W Mating Pin |
L4NF-7550 |
Solder | Self Flare | BB | 2.5 (64) | 0.91 (23.1) |
|
N Female |
5700 W Mating Pin |
L4NF-7550 |
Solder |
Self Flare | BB | 2.3 (58) | 0.91 (23.1) |
|
UHF Male |
- |
L44P-75 |
Solder | Self Flare | BB | 2.3 (58) | 0.91 (23.1) |
|
UHF Female |
L44U-75 |
Solder |
Self Flare | BB | 2.3 (58) | 0.91 (23.1) | |
|
CATV Equip. Housing |
- | 48070 | - | Self Flare | BB | 2.0 (50) | 0.91 (23.1) |
|
Splice |
- | L44Z-75 | Solder | Self Flare | BB | 3.2 (81) | 1.1 (27.9) |
|
Accessories |
| Description | Type No. |
|
Standard Hanger Kit of 10, single. Recommended maximum spacing is 3-ft (1m). |
43211A |
|
Hardware Kit of 10.3/8"
, bolts, lockwashers, nuts |
31769-5 31769-1 |
|
Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. |
206706-1 |
|
Click-On Hangers Kit of 10, Recommended maximum spacing is 3-ft |
L4CLICK |
|
Support/Hoisting Grip . Use at 200-ft (60m) intervals.Grip with one clamp Support clamp kit of 10 |
L4S GRIP L4SGRIP-4IK |
| Standard Hoisting Grip | 43089 |
|
Grounding and Surge Protection |
| Description | Type No. | |
| SureGround Kit with standard weatherproofing | ||
| Factory attached one-hole
lug, 600 mm (24") lead Factory attached two-hole lug, 600 mm24" lead Field attached two-hole lug, 1500mm (59") lead |
SGL4-06B1 SGL4-06B2 SGL4-06B4 |
|
| SureGround Kit with weatherproofing boot | ||
| Factory attached one-hole lug,
600 mm (24") lead Factory attached two-hole lug, 600 mm24" lead Field attached two-hole lug, 1500mm (59") lead |
SGPL4-06B1 SGPL4-06B2 SGPL4-15B4 |
|
| Weatherproofing | ||
|
Cold Shrink Weatherproofing Kit |
241474-4 242475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 241548-4 |
|
| Connector/Splice Weatherproofing Kit | 221213 | |
|
Entry Systems |
||
|
Standard Cable Entry Boots |
4" Boots | 5" Boots |
|
204679A-5 204679A-7 204679A-16 |
48939A-6 48939A-8 48939A-17 |
|
|
Tools |
CPT-L4ARC 207866 224363 244377 244379 |
|
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
