|
|
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
|
|
|
1/2" Foam Dielectric, LDF4-50A
|
||||||||||||||||||
|
Characteristics |
|
Electrical |
Mechanical |
||
|
Impedance, ohms |
50 ± 1 |
Outer Conductor |
Copper. |
|
Maximum Frequency, GHz |
8.8 |
Inner Conductor |
Copper-Clad Aluminum |
|
Velocity, percent |
88 |
Diameter over Jacket, in (mm) |
0.63 (16) |
|
Peak Power Rating, kW |
40 |
Diameter Copper Outer Conductor, in (mm) |
0.55 (14) |
|
dc Resistance, ohms/1000 ft (1000 m) |
1.45 (1.48) 0.58(1.90) |
Diameter Inner Conductor, in (mm) |
0.189 (4.6) |
|
dc Breakdown, volts |
4000 | Nominal Inside Transverse Dimensions, cm | 1.11 |
|
Jacket Spark, volts RMS |
8000 |
Minimum Bending Radius, in (mm) |
5 (125) |
|
Capacitance, pF/ft (m) |
23.1 (75.8) |
Number of Bends, minimum (typical) |
15 (50) |
|
Inductance, µH/ft (m) |
0.058 (0.19) |
Bending Moment, lb-ft (N•m) |
2.8 (3.8) |
|
Cable Weight, lb/ft (kg/m) |
0.15 (0.22) | ||
|
Tensile Strength, lb (kg) |
250 (113) | ||
|
Flat Plate Crush Strength, lb/in (kg/mm) |
110 (2.0) |
| Connectors |
 |
 |
 |
 |
 |
 |
| Interface |
Description |
Type Number |
Inner
Contact |
Outer
Contact |
Plating |
Max.
Length |
Max. Dia. |
|
N Male |
Hex Head |
L4PNM-H |
Solder |
Self-Flare | SG | 2.6 (66) | 0.95 (24.1) |
|
N Male |
RingFlare |
L4PNM-RC |
Captivated |
Self-Flare | SG | 3.0 (75.7) | 0.86 (21.8) |
|
N Male |
Right Angle, Hex |
L4PNR-H |
Solder |
Self-Flare | SG | 3.2/1.5 (81/38) | 0.95 (24.1) |
| N Male |
Right Angle, Hex |
L4PNR-HC |
Captivated | Self-Flare | SG | 3.2/1.5 (81/38) | 0.91 (23.1) |
| N Female |
- |
L4PNF |
Solder |
Captivated |
SG | 2.6 (66) | 0.94 (23.9) |
| N Female |
Bulk Head |
L4PNF-BH |
Solder |
Solder |
SG | 2.6 (66) | 0.96 (24.4) |
| N Female |
Panel Mount |
L4PNF-PM |
Solder |
Captivated |
SG | 2.6 (66) | 1.0 (25.4) |
| N Female |
RingFlare |
L4PNF-RC | Captivated | Ring-Flare | SG | 2.8 (71) | 0.86(21.8) |
|
7-16 DIN Male |
- | L4PDM | Solder | Self-Flare | SS | 2.6 (66) | 1.4 (35.6) |
|
7-16 DIN Male |
Right Angle |
L4PDR | Solder | Ring-Flare | SS | 1.8/2.8 (46/72) | 1.41 (35.9) |
|
7-16 DIN Male |
Right Angle |
LPDR-C | Captivated |
Solder |
SS | 1.8/2.8 (46/72) | 1.41 (35.9) |
| 7-16 DIN Male |
RingFlare |
L4PDM-RC | Captivated |
Ring-Flare |
SG | 2.64 (67.1) | 0.86 (21.8) |
| 7-16 DIN Female | - | L4PDF | Solder | Self-Flare | SS | 2.7 (69) | 1.1(27.9) |
| 7-16 DIN Female | Bulk Head | L4PDF-BH | Solder | Self-Flare | SS | 2.73 (69.4) | 1.62 (41.1) |
| 7-16 DIN Female | Bulk Head | L4PDF-BHC | Captivated | Self-Flare | SS | 2.9 (74) | 1.63 (41.4) |
| 7-16 DIN Female | Panel Mount |
L4PDF-PM |
Solder | Self-Flare | SS | 2.7 (69) | 1.2(29.4) |
| 7-16 DIN Female | RingFlare |
L4PDF-RC |
Captivated | Self-Flare | SG | 2.8 (71) | 0.86 (21.8) |
| 7/8" EIA Flange | - | L44R | Solder | Self-Flare | BB | 3.2 (81) | 2.25 (57.2) |
| 7/8"EIA Flange | Right Angle | 124990-1 | Solder | Self-Flare | BB | 2.3/1.6 (58/41) | 2.25 (57.2) |
| F Flange Male | - | L44F | Solder | Self-Flare | BB | 2.3 (58) | 2.25 (57.2) |
| F Flange Female | - | 209865 | Solder | Self-Flare | BS | 2.3 (58) | 2.25 (57.2) |
| UHF Male | - | L44P | Solder | Self-Flare | BB | 2.3 (58) | 0.91 (23.1) |
| UHF Female | - | L44U | Solder | Self-Flare | BS | 2.3 (58) | 0.91 (23.1) |
| HN Male | - | L44J | Solder | Self-Flare | BB | 2.5 (64) | 0.91 (23.1) |
| LC Male | - | L44M | Solder | Self-Flare | BB | 3.6 (91) | 0.91 (23.1) |
| TNC Female | - | L44NT | Solder | Self-Flare | BB | 2.8 (71) | 0.94 (23.9) |
| End Terminal | - | L44T | Solder | Self-Flare | BB | 4.0 (102) | 0.91 (23.1) |
| Splice | - | L44Z | Solder | Self-Flare | BB | 3.2 (81) | 1.1(27.9) |
|
Accessories |
| Description | Type No. |
|
Standard Hangers Kit of 10. Recommended maximum spacing is 3-ft (1 m). |
43211A |
|
Hardware Kit of 10. 3/8" bolts, lockwashers, nuts3/4" (19mm) long 1" (25mm) long |
31769-5 31769-1 |
|
Snap-In Hangers Kit of 10. For prepunched 3/4" (19mm) holes on tower member or adapters, Recommended maximum spacing is 3-ft. |
206706-1 |
|
Click-On Hangers Kit of 10. Recommended maximum spacing is 3-ft. |
L4CLICK |
|
Kwik-Clamps Kit of 10. |
|
|
Support/Hoisting Grip. Use at 200-ft (60m) intervals. |
|
|
Grip with one clamp |
L4SGRIP L4SGRIP-4IK |
|
Standard Hoisting Grip |
43094 |
|
Grounding and Surge Protection |
| Description | Type No. | |
| SureGround Grounding Kit with standard weatherproofing | ||
| Factory attached one-hole lug,
600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached one-hole lug, 1500 mm (59") lead |
SGL4-06B1 SGL4-06B2 SGL4-15B4 |
|
| SureGround Plus Grounding Kit with weatherproofing boot | ||
| Factory attached one-hole lug,
600 mm (24") lead Factory attached two-hole lug, 600 mm (24") lead Field attached one-hole lug, 1500 mm (59") lead |
SGPL4-06B1 SGPL4-06B2 SGPL4-15B4 |
|
| WeatherShield™ Connector Protection Housing | ||
| LDF5 To LDF4 LDF6 To LDF4 LDF7 To LDF4 |
WS-L5L4 WS-L6L4 WS-L7L4 |
|
|
Cold Shrink Weatherproofing Kit |
241474-4 242475-13 241475-9 241475-5A 241475-8 241548-8 241548-8 241548-4 |
|
| Connector/Splice Weatherproofing Kit | 221213 | |
|
Entry Systems |
4" Boots | 5" Boots |
|
Standard Cable Entry Boots |
204679A-5 204679A-7 204679A-16 |
48939A-6 48939A-8 48939A-17 |
|
Tools EASIAX® Plus Automated Cable Prep Tool: EASIAX® Cutting Tool Cable Flare Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench |
CPT-L4ARC 207866 224363 244377 244379 |
|
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
