WISCO International (ICOM- IC-R1500 Specifications)

General
Frequency coverage Guaranteed range* Cellular bands are blocked in the U.S.A. version. France	0.010–3299.999MHz* 0.495–3000.000MHz 0.010–29.999, 50.200–51.200, 87.500–108.00, 144.000–146.000, 430.000–440.000, 1240.000–1300.000MHz Guaranteed range 0.495–29.999MHz
Mode	AM, FM, WFM, USB, LSB, CW* * 0.01–1300MHz only.
Usable temperature range When using with a PC	–10°C to +60°C; +14°F to +140°F 0°C to +60°C; +32°F to +140°F
Frequency stability	Less than ±3ppm on the basis of 25°C (–10°C to +60°C)
Tuning steps	10Hz (minimum)
Power supply	12.0V DC ±15%
Current drain (at 12.0V DC) Max. audio Stand-by	0.85A typ. 0.7A typ.
Antenna Impedance	50Ω (BNC)
Dimensions Main Unit Controller	(W×H×D; projections are not included) 146×41×206 mm; 5³/₄×1⁵/₈×8¹/₈ in 111×40×26.5 mm; 4³/₈×1⁹/₁₆×1¹/₃₂ in
Weight (approx:) Main Unit Controller	1200g; 2.6lb 200g; 7oz (including cable)

Receiver

Receiver system

Triple-conversion superheterodyne + Down converter

Intermediate frequencies

1st	266.70MHz
2nd	10.70MHz
3rd	450kHz (Except WFM)

Sensitivity (Less than)

	SSB, CW	AM	FM	WFM
0.495–1.799MHz	5.0μV	25μV	–	–
1.8–49.999MHz	0.5μV	2.5μV	0.63μV^*2	–
50–699.999MHz	0.4μV	2μV	0.5μV	1.4μV
700–1300.000MHz	0.5μV	2.5μV	0.63μV	1.8μV
1300^*1–2299.999MHz	–	–	5.6μV	18μV
2300–3000.000MHz	–	–	18μV	56μV

^*1 1300.000001MHz
^*2 28–49.999MHz
SSB, CW BW=2.8kHz, AM BW=6.0kHz at 10dB S/N FM BW=15kHz, WFM BW=230kHz at 12dB SINAD

Selectivity
SSB, CW, AM
SSB, CW, AM, FM
FM, AM
FM, AM, WFM
WFM

(typical)
More than 2.8kHz/–6dB
More than 6.0kHz/–6dB
More than 15kHz/–6dB
More than 50kHz/–6dB
More than 230kHz/–6dB

Audio output power

More than 500mW at 10% distortion with an 8Ω load

External SP connector

2-conductor 3.5 (d) mm (¹⁄₈″)/8Ω

Options

AD-113A/E AC ADAPTOR
10.5V DC, 1.8A/1.5A (A/E) output. Same as supplied.
CP-12L CIGARETTE LIGHTER CABLE
12V DC, 2A output from 12V cigarette lighter socket.
OPC-254L DC POWER CABLE
For use with an external power supply. (12V DC required)
OPC-441 SPEAKER EXTENSION CABLE
5.0m (16.4ft) speaker extension cable.
OPC-1156 CONTROLLER EXTENSION CABLE
Extends the supplied separation cable by 3.5 m (11.5 ft).
A modular connector is supplied with the cable.
SP-10 EXTERNAL SPEAKER
To better direct the audio where you want it.
UT-106 DSP UNIT
Provides noise reduction and auto notch functions.
MB-58 REMOTE CONTROL BRACKET
Mounts the controller in a convenient location.
MB-65 MOUNT BASE

Mounts the controller with the MB-58. Adjustable angle and direction for optimum positioning.

Some options may not be available in some countries. Please ask your dealer for details.

All stated specifications are subject to change without notice or obligation.

Rear view

Rear View

Please turn off the Main unit power switch when not using the IC-R1500, while installed in a vehicle. The IC-R1500 has standby power consumption that will drain the vehicle battery over a period of time.

PC requirements (For use with PC control software)

Microsoft® Windows® XP/2000/ME/98SE
USB 1.1 or 2.0
Intel® Pentium® III 450MHz or faster
Hard disk with at least 50 MB of free disk space
At least 128 MB of memory (256MB or more recommended)
Display with 1024 × 768 pixel resolution, high color
CD-ROM or DVD drive is required for software installation
USB audio dropouts or gaps may occur because of a lack of PC power
Additional hard disk space is required for recording sound or storing scope data

Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and in other countries. All other trademarks are the properties of their respective holders. The main picture is retouched and shows installation image only.