WISCO International

Home Page | Manufacturers | Receiver | IC-R2500 | Quotation Request | Search | E-mail

IC-R2500
SPECIFICATIONS
 

General
Frequency coverage
Main receiver 

Sub-receiver 

France
0.010–3299.999MHz* (Guaranteed range 0.495–3000MHz)
0.495–1300MHz*,
50–1300MHz*
 * Some frequency bands are blocked in the U.S.A. version.

 0.010–29.999*,
50.200–51.200,
87.500–107.999,
144–146,
430–440,
1240–1300MHz
* Main receiver only. Guaranteed range 0.495–29.999MHz.
Mode AM, FM, WFM, USB*1, LSB*1, CW*1, DV*2, P25*3
*1 0.01-1300MHz only.
*2 Optional UT-118 required.
*3 Optional UT-122 required.
Usable temperature range 0°C to +60°C; +32°F to +140°F
Frequency stability Less than ±3ppm on the basis of 25°C (0°C to +60°C)
Tuning steps 1Hz (minimum)
Power supply 12.0V DC ±15%
Current drain (at 12.0V DC)
Max. audio
Stand-by		  
Less than 1.5A (Dual mode)
0.85A typ. (Dual mode)
Antenna Impedance 50Ω (BNC)
Dimensions
(Projections are not included)		 146×41×206 mm;
53⁄4×15⁄8×81⁄8 in (W×H×D)
Weight (approx:) 1350g; 3lb
 

Receiver
Receiver system Triple-conversion superheterodyne + Down converter
Intermediate frequencies
1st 266.70MHz
2nd 10.70MHz
3rd 450kHz (Except WFM)
Sensitivity (Less than)
  SSB, CW AM FM WFM
0.495–1.799MHz 5.0μV 25μV – –
1.8–49.999MHz 0.5μV 2.5μV 0.63μV*2 –
50–699.999MHz 0.4μV 2μV 0.5μV 1.4μV
700–1300.000MHz 0.5μV 2.5μV 0.63μV 1.8μV
1300*1–2299.999MHz – – 5.6μV 18μV
2300–3000.000MHz – – 18μV 56μV

*1 1300.000001 MHz
*2 28–49.999MHz
SSB, CW BW=2.8kHz, AM BW=6.0kHz at 10dB S/N FM BW=15kHz, WFM BW=230kHz at 12dB SINAD
Selectivity (typical)
SSB, CW, AM
SSB, CW, AM, FM
FM, AM
FM, AM, WFM
WFM
More than 2.8kHz/–6dB
More than 6.0kHz/–6dB
More than 15kHz/–6dB
More than 50kHz/–6dB
More than 230kHz/–6dB
Audio output power More than 500mW at 10% distortion with an 8Ω load
External SP connector 2-conductor 3.5 (d) mm (1⁄8″) /8Ω
 
PC requirements (For use with PC control software)
  • Microsoft® Windows® XP/2000/ME/98SE
  • USB 1.1 or 2.0
  • Intel® Pentium® III 450MHz or faster (Pentium® 4 recommended)
  • Hard disk with at least 50 MB of free disk space
  • At least 128 MB of memory (256MB or more recommended)
  • Display with 1024 × 768 pixel resolution, high color
  • CD-ROM or DVD drive is required for software installation
  • USB audio dropouts or gaps may occur because of a lack of PC power
  • Additional hard disk space is required for recording sound or storing scope data

OPTIONS

  • UT-106 DSP UNIT
    Provides noise reduction and auto notch functions.
  • UT-108 DTMF DECODER UNIT

    DTMF decode function for Sub-receiver. Either UT- 108 or UT-118 can be installed in the receiver.

  • UT-118 D-STAR DIGITAL UNIT
    Provides D-STAR DV mode reception. Either UT-108 or UT-118 can be installed in the receiver.
  • UT-122 P25 DIGITAL UNIT
    Provides APCO P25 digital mode reception.
  • AD-113A/E AC ADAPTOR
    10.5V DC, 1.8A/1.5A (A/E) output. Same as supplied.
  • CP-12L CIGARETTE LIGHTER CABLE
    12V DC, 2A output from 12V cigarette lighter socket.
  • OPC-254L DC POWER CABLE
    For use with an external power supply. (12V DC required)
  • SP-10 EXTERNAL SPEAKER
    For all-round mobile operation.

All stated specifications are subject to change without notice or obligation.
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com
 

Home Page | Manufacturers | Receiver | IC-R2500 | Quotation Request | Search | E-mail