WISCO International

Home Page | Manufacturers | Receiver | IC-R3 | Quotation Request | Search | E-mail

IC-R3
SPECIFICATIONS

 
 GENERAL
Frequency range : 0.495-2450.095 MHz*
* 816-901.995 MHz range is inhibited for the U.S.A. version.
Mode : FM, AM, WFM, AM-TV*1 , FM-TV*2
*1 One of either NTSC M, PAL B or PAL G systems.
*2 For 900–1300 MHz, 2250–2450 MHz ranges only; not available in some versions.
Frequency resolution : 5 kHz, 6.25 kHz
Number of memory channel : 450 (50 channel × 8 banks plus 50 scan edges)
Antenna connector : BNC (50 Ω)
Operating temperature range : -0°C to +60°C ; +14°F to +140°F
Frequency stability : ±6 ppm max. (-10°C to +50°C)
Power supply requirement : 3.6-6.3 V DC (negative ground)
Current drain (at 4.5 V DC)
: At rated output
  At stand-by
  Power save
  TV reception
  210 mA typical (backlight OFF)
  140 mA typical
  53 mA typical
  730 mA typical (color LCD ON)
Dimensions
 (projections not included)
: 61(W) × 120(H) × 32.9(D) mm;
  2 13/32(W) × 4 23/32(H) × 1 9/32(D) in
Weight : 300 g; 10.6 oz
 RECEIVER
Receiver system : Triple-conversion* superheterodyne
* below 1150 MHz; Quadruple-conversion for above 1150 MHz
Intermediate frequencies
 (Unit MHz)

 
AM,FM WFM C3F(TV)
U.S.A.
 
Europe
1st 240.1 240.1 241.85*1 , 238.35*2
2nd 26.05 13.25 45.75 38.90
3rd 0.450 0.450 __

*1 30-799.995, 1321-2099.995 MHz range
*2 800-1320.995, 2100-2450.095 MHz range

Sensitivity (typical)
AM
 (at 10 dB S/N)
0.495-4.995 MHz
5.0-29.995 MHz
118-136 MHz
222-329.995 MHz
1.4 µV
1.0 µV
0.79 µV
1.0 µV
FM
 (at 12 dB SINAD)
1.625-4.995MHz
5.0-469.995 MHz
470-799.995 MHz
800-1999.995 MHz
2000-2299.995 MHz
2300-2450.095 MHz  
0.32 µV
0.25 µV
0.45 µV
0.56 µV
1.0 µV
1.8 µV
WFM
 (at 12 dB SINAD)  
76-107.995 MHz
175-221.995 MHz
470-769.995 MHz
1.0 µV
1.0 µV
1.8 µV
Selectivity
FM, AM  

WFM
More than 12 kHz/-6 dB
Less than 30 kHz/-50 dB
More than 150 kHz/-6 dB
Audio output power (at 4.5 V DC) : 100 mW typical at 10% distortion with an 8Ω load
External SP connector : 3-conductor 3.5 (d) mm (1/8")/8 Ω
Video/Audio OUT connector : 3-conductor 3.5 (d) mm (1/8")/8Ω
 

Supplied accessories

  • Antenna
  • Belt clip
  • Battery spacer
  • Li-Ion battery cell assembly*
  • Wall charger*
    *depending on version

OPTIONS

  • BP-206 Li-Ion BATTERY CELL ASSEMBLY
    3.7 V/1650 mAh Lithium Ion battery pack.
  • BC-135 DESKTOP CHARGER
    For rapid charging of battery pack, BP-206. An AC adapter, BC-123 or BM-104, is supplied with the charger. Charging time: approx. 2.5 hours
  • BC-136A/D WALL CHARGER
    6 V DC, 500 mA output AC adapter for regularly charging the installed battery pack, BP-206. Charging time: approx. 10 to 15 hours.
  • LC-151 CARRYING CASE
    Helps protect the receiver from scratches, etc.
  • CP-18A/E CIGARETTE LIGHTER CABLE
    Allows you to operate the receiver through 12 V cigarette lighter socket, and also charges installed battery pack. A DC-DC converter is built-in.
  • SP-13 EARPHONE
    Provides clear audio in noisy environment.
  • CS-R3 CLONING SOFTWARE + OPC-478 CLONING CABLE
    Allows quick and simple setting of receiving frequencies, memory names, etc, from a PC (Microsoft® Windows®95/98).
  • OPC-474 CLONING CABLE
    Used for data cloning between receivers.
    Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries.
All stated specifications are subject to change without notice or obligation.
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com
 

Home Page | Manufacturers | Receiver | IC-R3 | Quotation Request | Search | E-mail