WISCO International

Home Page | Manufacturers | ICOM | IAS- 100WV | Quotation Request | Search | E-mail

IAS- 100WV / IAS- 100WU
Specifications
 
GENERAL
Frequency coverage:
IC-FR3000:
IC-FR4000:		 148–172MHz, 150–174MHz
400–430MHz, 430–450MHz,
450–480MHz
Number of channels 32
Channel spacing 12.5 / 25 kHz
PLL channel step 5, 6.25kHz
(2.5kHz, VHF repeater operation only)
Frequency stability:
IC-FR3000:
IC-FR4000:		 ±2.5ppm
±1.5ppm (U.S.A. version),
±2.5ppm (Other versions)
Operating temperature range: –30°C to +60°C; –22°F to +140°F
Power supply voltage:
(depending on version)		 100–120V AC (50/60Hz),
220–240V AC (50/60Hz),
Current drain (at 13.6 V DC) 13.6V DC
TX IC-FR3000 (at 50W) 15A
IC-FR4000 (at 50W) 20A
RX Max. audio 2A typ.
Stand-by 1A typ.
Antenna impedance: 50Ω (Type-N×2)
Dimensions (WxHxD): 410 ×110 ×360 mm;
16 5 /32 ×4 11 /32 ×14 3 /16 in
Weight 12kg; 26.4lb (approx.)
RECEIVER
Sensitivity 0.25µV typ. (at 12dB SINAD)
Adj. channel selectivity 70dB (wide) 60dB (narrow)
Spurious response rejection 70 dB
Intermodulation rejection 70 dB
Hum and noise ratio: 40dB (wide) 34dB (narrow)
Audio output power 2.5W typ. at 10% distortion
with a 4Ω load
External speaker connector: 2-conductor 3.5 (d) mm
(1 /8”)/4Ω
TRANSMITTER
Output power 50W (high), 10W (low)
selectable (at 13.6V DC)
Max. frequency deviation ±5.0 kHz (wide)
±2.5 kHz (narrow)
Spurious emissions 70 dB min.
Adjacent channel power: 70dB (wide) 60dB (narrow)
Hum and noise: 40dB (wide) 34dB (narrow)
Microphone impedance: 600Ω (8-pin modular)
 
PA Specifications
Max. rated load VSWR for
continuous duty operation:		 1.2:1 (<5% refl ected power)
Max. VSWR rating
without damage:		 5:1 all phase angles. VSWR or
thermal protection may operate above 2:1 VSWR
Input/output connectors:
 		 Type: N FEMALE standard
         UHF FEMALE optional
Spurious Outputs: Meets FCC requirements
Harmonics: Meets FCC requirements
Operating Temperature range 0 - 50°C
Input Return Loss > 10 dB
Cooling Fan cooled
 
Options
 
Programming software and cables:
  • Allows you to edit/program the features and
     settings of the FR3000/4000.
  • Programming cable and adapter also required.
  • Each component (software, cable and adapter)
     sold separately.

Microphone

  • Available as standard or DTMF.

Service manual CD

  • Contains schematics and detailed theory of
     operation.

Duplexer

  • Required if your repeater is using a single
     antenna
   IAS Antenna Switch.
  • Needed for base operation.
  • 19” rack-mountable, sold separately

Cabinets

  • Available in 30”, 46”, and 60” sizes.
  • Includes locking, ventilating doors and cable access ports.
  • Factory assembled.

Racks

  • Available in 28”, 48”, 63”, and 70” sizes.
  • Includes custom assembly and mounting, hardware; factory-assembled.

Remote Control Tone Termination Panel

  • Allows remote control of your repeater/base.
  • Rack mount available.
  • Tone remote desk sets available.
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com
 

Home Page | Manufacturers | ICOM | IAS- 100WV | Quotation Request | Search | E-mail