|
|
Home Page | Manufacturers | IDA | Base Station | Quotation | Search | E-mail |
LOCAL, D.C.
& TONE REMOTES |
Model 24-11 Extended Local Remote Controller Designed to extend base station radio operation for distances up to 300 feet, the 24-11 provides an economical solution for many applications. The 24-11 features internal voice amplification of Transmit audio. This ensures high quality audio reproduction over lengthy unconditioned lines. If the base station radios receive audio output is not sufficient, an optional audio amplifier (option 217) is available. Operating features include: Telephone convenience: Compact, rugged phone style
units offering handset privacy. Model 24-10/24-15 Remote Controllers The 24-10 telephone style DC Remote with handset and transistorized dynamic mic has become the workhorse of the industry. The Model 24-15 is designed and operates using identical specifications to the 24-10 with the additional feature of two-way compression over a 30db range. Both units use the same polarity and current configurations. Optional polarities and current adaption are available. Operating features include: Two frequency operation: Transmit (F1 = + 15mA.
F2=-15mA) Model 24-20 Tone Remote Controllers IDA Tone Remotes are compatible with the industry standard sequential tone and single tone formats. The 24-20 Tone Remotes provide all functions necessary to operate a fixed location base station radio from a control point other than the radio itself. When operated in conjunction with the IDA 20-27 Tone Remote Adapter Panel, these units provide an economical yet sophisticated answer to base station control. The 24-20 Tone Remotes have proven themselves in installation after installation around the world.Operating features include: Two frequency operation Intercom On Hook Monitor (Disable CTCSS) Notch filter 2/4 wire jumper selectability Full 500m watts audio output to a four inch speaker |
TECHNICAL SPECIFICATIONS | ||||
DC REMOTES |
TONE REMOTES |
|||
24-46 | 24-10 | 24-66 | 24-20 | |
Input Voltage | 117/230 VAC + 20% 50/60Hz | 117/230 VAC + 10% 50/60Hz | 117/230 VAC + 20% 50/60Hz | 117/230 VAC + 10% 50/60Hz |
Standby Voltage | --- | --- | 12-15VDC | 12-15VDC (Nominal) |
Standby current | --- | --- | 287mA (TX) 620mA (RX)(STBY) |
950mA (TX) 600mA (RX), 400mA (STBY) |
Input power (max) | 17W (TX) 24W (RX) 4W (STBY) |
11W (TX) 20W (RX) 6W (STBY) |
8.5W (TX) 10W (RX) 8.5W (STBY) |
11W (TX) 11.5W (RX) 8W (STBY) |
Temperature range | 30 deg to +60 deg | 30 deg to +70 deg | 30 deg to +60 deg | 30 deg to +70 deg |
Relative humidity | 90% at 50 deg C | |||
Line impedance (1Khz) | 600 ohms (TX) 600 or 5k ohms (RX) |
|||
Line
audio output (600 ohm load) |
20 to +10dbm | 10 to +30dbm | 20 to +10dbm | 15 to +20dbm |
TX hum
& noise (ref +11dbm) |
55db | 50db | 55db | 50db |
Threshold
of compression (line to speaker audio) |
20dbm adjustable | 20dbm | 20dbm adjustable |
21dbm |
Speaker audio output RMS | 3W into 4 ohms | 500mW into 8 ohms | 3W into 4 ohms | 500mW into 8 ohms |
Distortion
(at rated speaker output) |
Less than 3% | Less than 5% | Less than 3% | Less than 5% |
RX hum & noise | 55db | 49db | 55db | 50db |
Frequency
response (300 to 3,000Hz) |
+1, 3db | +1, 3db | 3db except at notch frequency |
+2, 2db except at notch frequency |
RX compression | With an audio increase of 30db beyond the start of compression the output increases less than 3db | |||
TX compression | With an audio increase of 30db beyond the start of compression the output increases15 to 16db | With an audio increase of 30db beyond the start of compression the output increases15 to 16db | ||
Line control | 2 or 4 wire audio | |||
Notch filter depth | N/A | 45db (RX) 25db (TX) |
40db (RX) | |
Weight | 4lbs 15oz | 5lbs | 4lbs 15oz | 5lbs |
Dimensions | 4.75"(H)x10"(W) x8"(D) |
5"(H)x 5"(W)x9"(D) | 4.75"(H)x10"(W) x 8"(D) |
5"(H)x 5"(W)x9"(D) |
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
Home Page | Manufacturers | IDA | Base Station | Quotation | Search | E-mail |