WISCO International

Kenwood

Home Page | Manufacturers | Kenwood | TK-7100H | Quotation | Search | E-mail

SPECIFICATIONS

General

TK-7100H

TK-8100H

Frequency Range
Type 1
Type 2
Type 3


146 ~174 MHz
136 ~ 162 MHz
-


450 ~ 490 MHz
485 ~ 512 MHz
400 ~ 430 MHz

Channels / Groups

64 CH / 8GRP
Up to 64 channels can be allocated into 8 groups

Channel Spacing (Wide/Narrow)

25 kHz / 12.5 kHz

PLL Channel stepping

2.5, 5, 6.25, 7.5 kHz

5, 6.25 kHz

Operating Voltage

13.6 V DC �15%

Current Drain
Standby
Receive
Transmit


0.4 A
1.0 A
14.0 A

Operating temperature range

22�F ~ +140� F (-30�C ~ +60�C)

Frequency stability (-30� C ~ +60� C)

�2.5 ppm

Dimensions (W x H x D)

6 6/5 x 1-11/16 x 5-3/8 in.
(160 x 43 x 137 mm)

Weight (body only)

2.6 lbs. (1.18 kg)

Antenna Impedance

50 W

Channel Frequency Spread
  Type 1
  Type 2
  Type 3


28 MHz
26 MHz
-


40 MHz
27 MHz
30 MHz

RECEIVER (EIA/TIA-204D) TK-7100H TK-8100H
Sensitivity (Wide / Narrow)

0.28�V / 0.35 �V (12 dB SINAD)

Selectivity (Wide / Narrow)

75 dB / 65 dB

Intermodulation distortion
(Wide / Narrow)

70 dB / 60 dB

Spurious response

75 dB

Audio output (4W 5% distortion)

4.0 W dB

TRANSMITTER (Measurement made per EIATIA-603)    
RF power output

50W / 25W

45W / 25W

Spurious & harmonics

70dB

Modulation  Wide / Narrow

16K�F3E / 11K�F3E

FM noise Wide / Narrow

45 dB / 40 dB

Audio distortion

Less than 3%

Microphone impedance

600 W

Applicable MIL-STD

Standard MIL 810C
Methods/Procedures
MIL 810D
Methods/Procedures
MIL 810E
Methods/Procedures
MIL 810F
Methods/Procedures
Dust 510.1/ Procedure I 510.2/ Procedure I 510.3/ Procedure I 510.4/ Procedure I, III
Vibration 514.2/ Procedure VIII, X 514.3/ Procedure I 514.4/ Procedure I 514.5/ Procedure I, Cat.20
Shock 516.2/ Procedure I, II, V 516.3/ Procedure I, ,IV 516.4/ Procedure I, IV 516.4/ Procedure I

Options

KMC-30 - Microphone (supplied)

KMC-32 - 16 key Keypad Microphone

KES-3 - External Speaker

KLF-2 - Line Filter

KPS-10A - Regulated DC Power Supply

KPS-15 - DC Switching Power Supply

KMB-10 - Key Lock Adapter

KMB-19 - Installation Kit

KGP-2A - GPS Receiver Modem (requires KCT-39 options).

KGP-2B - GPS Controller Modem (requires KCT-39 options).

KDS-100 - Mobile Data Terminal (requires KCT-39 options)

KCT-18 - Ignition  Sense Cable (requires KCT-39 option)

KCT-36 - 3m  Extension Cable (for KCT-39)

KCT-39 - Connection Cable

WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Kenwood | TK-7100H | Quotation | Search | E-mail