![]() |
|
LMV-181A: AC Millivoltmeter |
![]() The LMV series of average responding rms reading
ac millivoltmeters are applicable to a wide range of general purpose single
or dual channel measurements. For stereo audio, the LMV-186A is very apt for measuring record and playback levels, channel separation, balance and tracking tests of volume, loudness and tone controls versus frequency, etc. The flat bandwidth of the amplifier output terminals on both models often permit them to be used as sensitive, accurate instrument preamplifiers. Other areas of use include test and repair for communications, IF and ultrasonic circuits and systems.
|
Specifications |
METER Sensitivity 100 �V Voltage Range (Full Scale) 1 mV to 300 V in 12 ranges -60 to +50 dBV, -60 to +52 dBm (0 dBV = 1 V, 0 dBm = 0.775 V) Accuracy � 2% full scale at 1 kHz or 400 Hz Frequency Response (1 kHz ref) LMV-181A 20 Hz - 200 kHz � 2% 10 Hz - 500 kHz � 5% 5 Hz - 1 MHz � 10% LMV-186A 20 Hz - 100 kHz � 3% 10 Hz - 200 kHz � 5% 5 Hz - 500 kHz � 10% Input Impedance LMV-181A 10 MW, 50 pF LMV-186A 10 MW � 45 pF (1 mV to 300 mV) � 25 pF (1 V to 300 V Maximum Input 600 V (dc + ac peak) Noise Less than 2% full scale ENVIRONMENTAL
|
AMPLIFIER Output 1 V rms (no load) corresponds to a full scale indication on each range Frequency Response (1 kHz ref) 10 Hz to 200 kHz (-3 dB) Output Impedance 600 W � 20% Distortion (1 kHz) � 1% full scale POWER
REQUIREMENTS PHYSICAL SUPPLIED ACCESSORIES |
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |