ANI-F
Programmable Burst Tone Encoder
Can be programmed to any burst tone frequency from
300-3600 Hz with up to 4 switch selectable tones with
our KL-3 Programmer. |
 |
|
BTD-1
Subminiature Tunable Burst Tone Decoder
Tunable to virtually any burst tone
frequency. Can be used with continuous tone on microwave
E&M applications. |
 |
|
|
BTD-2
Subminiature Burst Tone Decoder
Three decode registers that can be programmed to any
burst tone frequency from 300-3000 Hz |
 |
|
|
BTE-1
Subminiature Tunable Burst Tone Encoder
Tunable burst tone encoder that can be tuned to
virtually any burst tone frequency. The BTE-1 can be
configured for continuous mode which will give an output
as long as the radio is keyed. |
 |
|
|
BTE-3 DMH
Horizontal Dashmount Burst Tone Encoder
Has a 16 position switch for selecting up to 16 burst
tone frequencies. |
 |
|
|
BTE-3 DMV
Vertical Dashmount Burst Tone Encoder
Can select up to 10 burst tones using a DTMF keypad. |
 |
|
|
BTE-3 MIC
10 Code Burst Tone Encoding Microphone
Can select up to 10 burst tones using a DTMF keypad. |
 |
