 |
|
|
|
|
|
Specifications |
| General | VHF model ML3215 |
UHF model
ML3245 |
| Frequency Range | 148-174 MHz | 450-490 MHz |
| Channels | 32 | |
| Weather Channels | 7 | |
| Channel Spacing | 25 / 30 / 12.5 / 15 KHz | 25 / 12.5 KHz |
| PLL Step |
2.5 / 5.0 / 6.25 / 7.5 KHz |
5.0 / 6.25 KHz |
| Channel Spread | 26 MHz | 40 MHz |
| Antenna Impedance |
50 Ω |
|
| Input Voltage | 13.8V DC +/-20% | |
| Current Drain Standby Receive Transmit |
|
|
| Operating Temperature | -22� F to 140�F (-30� to +60� C) | |
| Frequency Stability (-30� to +60� C) |
+/-2.5 ppm |
|
| Dimensions (W x H x D) |
6-5/15" x 1-3/4" x 6" |
|
| Weight (with microphone) |
2 lbs, 8 oz. (1.3 km) |
|
| FCC Identifier |
O7KML3215 |
O7KML3245 |
| FCC Compliance |
Parts 20, 22, 74 |
Parts 22, 74, 90, 95 |
| IC Certification Number |
3772A-ML3215 |
3772A-ML3245 |
| Receiver (measurement procedures made per ANSI/EIA/TIA-603) | ||
| Sensitivity (12dB SINAD) | 0.25 uV @ 12.5 KHz | 0.25 uV @ 25 KHz |
| Selectivity | 60 dB @ 12.5 KHz | 65 dB @ 25 KHz |
| Intermodulation | 60 dB @ 12.5 KHz | 65 dB @ 25 KHz |
| Spurious Response |
65 dB |
|
| Audio Output | 4W (int.) 8
Ohm / 4W (Ext.) @ 8 Ohm (Method @ < 10% THD level) |
|
| Transmitter (measurement procedures made per ANSI/EIA/TIA-603) | ||
| RF Power Output. | 2 or 45 Watts | |
| Spurious & Harmonics | 65 dB | |
| Modulation | 11K0F3E 2.5KHz max | 16K0F3E 5KHz max |
| FM Hum & Noise | 40 dB @ 12.5 KHz | 40 dB @ 25 KHz |
| Audio Distortion | 2 % | |
|
MIL-STD methods / procedures The Legacy ProLine ML3215 are approved to the following: |
|||||||||||
|
|||||||||||
| Specifications are subject to change without notice. |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
