|
Specifications |
General | VHF
model SM2541 |
UHF
model SM2544 |
Frequency Range | 148-174 MHz | 440-470 MHz |
Channels | 4 | |
Channel Spacing | 25 / 12.5 KHz | |
PLL Step |
2.5 / 5.0 / 6.25 KHz |
|
Channel Spread | 26 MHz | 30 MHz |
Antenna Impedance |
50 Ω |
|
Input Voltage | 13.8 V DC | |
Current Drain Standby Receive Transmit |
|
|
Operating Temperature | -22� F to 140�F (-30� to +60� C) | |
Frequency Stability (-30� to +60� C) |
+/- 0.0005 % |
|
Dimensions |
7" x 2" x 6.25" (178 x 44 x 152 mm) |
|
Weight |
3 lbs, 6 oz. (1.5 km) |
|
FCC Identifier |
F3JSM2150 |
F3JSM2450 |
FCC Compliance |
Parts 20, 22, 74, 90, 90.210 |
Parts 22, 74, 90, 90.210, 95 |
IC Certification No. |
3772195173A |
3772194331A |
Receiver (measurement procedures made per ANSI/EIA/TIA-603) | ||
Sensitivity (12dB SINAD) | 0.25 �V | |
Selectivity | 60 dB @ 12.5 KHz | 70 dB @ 25 KHz |
Intermodulation | 70 dB @ 12.5 KHz | 70 dB @ 25 KHz |
Spurious Response |
70 dB |
|
Audio Output | 4W | |
Transmitter (measurement procedures made per ANSI/EIA/TIA-603) | ||
RF Power Output. | 1 Watt, low; 25 Watts, high | |
Spurious & Harmonics emissions | 70 dB | |
Modulation | 16K0F3E / 11K0F3E | |
FM Hum & Noise | 40 dB @ 12.5 KHz | 40 dB @ 25 KHz |
Audio Distortion | < 5% @ 1kHz |
MIL-STD methods / procedures The Legacy ProLine ML3215 are approved to the following: |
|||||||||
|
Specifications are subject to change without notice. |
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |