|
PL-2200 Series Specifications |
General |
VHF model |
UHF model |
Frequency Range |
V2: 148-174 MHz |
U2: 450-490 MHz |
Channels |
2 |
|
Channel Spacing |
25 / 30 / 15 / 12.5 kHz |
25 / 12.5 kHz |
PLL Step |
2.5 / 5 / 6.25 / 7.5 kHz |
5.0 / 6.25 kHz |
Channel Spread | 26 MHz | 40 MHz |
Antenna Impedance | 50 W | |
Operating Voltage |
7.2V DC Nominal |
|
Battery Life (with 750 mAh NiMH battery) w/optional 1350 NiMH battery |
11 Hours @ 2W (90-5-5 duty cycle) |
|
Operating Temperature | -22�F to +140�F (-30� C to +60� C) | |
Frequency Stability (-30� C to +60� C) |
� 2.5 ppm | |
Dimensions (H x W x D) with battery |
4-7/8" x 2-1/4" x 1-1/4" (125 x 58 x 32 mm) |
|
Weight (with 750 mAh NiMH battery and antenna) |
13.6 oz. (380 gm) |
|
FCC Identifier | O7KPL150 | O7KPL450A |
FCC Compliance |
Parts 90, 90.201 |
Parts 22, 74, 90, 95A |
Canada Certification Number | 3772196843A | 3772104407A |
RECEIVER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
Sensitivity (12 dB SINAD) | .25 �V @12.5 kHz |
|
Selectivity |
60 dB @12.5 kHz |
|
Intermodulation |
60 dB @12.5 kHz |
65 dB @25 kHz |
Spurious Response | 60 dB |
|
Audio output |
500 mW (Int.) @ 8Ω; |
|
TRANSMITTER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
RF Output | 2 Watts | |
Spurious and Harmonics Emissions | 60 dB |
|
Modulation |
16KOF3E, 11KOF3E |
|
FM Hum and Noise |
40 dB @ 12.5 kHz |
|
Audio distortion |
< 2% |
MIL-STD methods / procedures The Maxon PL2415 and PL2445 are approved to the following: |
Standard | 810F Method / Procedure |
Rain (Watertightness) | 506.4 / Proc. II |
Humidity | 507.4 / Proc. I |
Blowing Dust | 510.4 / Proc. I |
Vibration | 514.5 / Proc. I |
Shock | 516.5 / Proc. I |
Specifications are subject to change without notice. |
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |