 |
|
|
|
|
|
SP-200K Specifications |
|
| General |
VHF model |
UHF model |
| Frequency Range |
V2: 148-174 MHz |
U2: 440-470 MHz |
| Channels |
Up to 199 |
|
Channel Spacing |
30 / 25 / 15 / 12.5 kHz |
|
| PLL Step | 5.0 / 6.25 / 7.5 kHz | |
| Channel Spread | 26 MHz | 30 MHz |
| Antenna Impedance | 50 W | |
| Operating voltage |
7.5V DC Nominal |
|
|
Battery Life (Battery
Life (with 1350 mAh NiMH battery) (with optional 900 mAh Prismatic battery) |
>8 Hours @ 5W (90-5-5 duty
cycle) |
|
| Operating Temperature | -22�F to +140�F (-30� C to +60� C) | |
| Frequency Stability (-30� C to +60� C) |
�2.5 ppm | |
| Dimensions (H x W x
D) (with battery) |
4-1/4" x 2-5/16" x 1-1/2" (108 x 59 x 38 mm) | |
| Weight (with 1350
mAh NiMH battery and antenna) |
11.8 oz. (335 gm) | |
| FCC Identifier | F3JSP200V2 | F3JSP200U2 |
FCC Compliance |
22, 74, 80, 90, 90.210 | 22, 74, 90, 90.210 , 95A |
| Canada Certification Number | 3772195571A | 3772195572A |
|
RECEIVER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
|
Sensitivity (12 dB SINAD) |
.25 �V .25 �V |
|
| Selectivity |
65 dB @ 12.5 kHz; 75 dB @ 25 kHz |
|
| Intermodulation |
60 dB |
|
| Spurious Response |
70 dB |
|
| Audio output |
1.0 W (Int.) @ 4 Ω; 550 mW (Ext.) @ 8 Ω |
|
|
TRANSMITTER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
| RF Output |
5 Watts or 1 Watt (programmable per channel |
|
| Spurious and harmonics Emissions |
60 dB 60 dB |
|
| Modulation |
16K0F3E, 11K0F3E, 10K0F3E |
|
| FM Hum and Noise |
40 dB @ 12.5 kHz; 45 dB @ 25 kHz |
|
| Audio distortion |
2% |
|
|
MIL-STD methods / procedures The Maxon SP-200K and SP-210K are approved to the following: |
| Standard | 810F Method / Procedure |
| Rain (Watertightness) | 506.4 / Proc. II |
| Humidity | 507.4 / Proc. I |
| Blowing Dust | 510.4 / Proc. I |
| Vibration | 514.5 / Proc. I |
| Shock | 516.5 / Proc. I |
| Specifications are subject to change without notice. |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
