|
|
|
|
|
ANT450F10 |
 DESCRIPTION
AND FEATURES:The Telewave ANT450F10 is an extremely rugged, high-gain, fiberglass collinear antenna, designed for operation in all environmental conditions. The antenna is constructed with brass and copper elements, connected at DC ground potential for lightning impulse protection. All junctions are fully soldered to prevent RF intermodulation, and each antenna is completely protected within a high-tech ruggedized radome to ensure survivability in the worst environments. The �Cool Blue� radome provides maximum protection from corrosive gases, ultraviolet radiation, icing, salt spray, acid rain, and wind blown abrasives. Please specify exact frequency when ordering. MOUNTING: The ANT450F10 includes a dual clamp set for
mounting to a 1.5� to 4� diameter support pipe. |
|
SPECIFICATIONS |
| ELECTRICAL SPECIFICATIONS | |
| Power Rating (typical) | 500 Watts |
| Gain | 10 dBd |
| Frequency Range | 425-470 MHz |
| VSWR | 1.5:1 or less |
| Impedance | 50 Ohms |
| Vertical Beamwidth | 7 Degrees |
| Pattern | Omnidirectional |
| Lightning Protection | DC Ground |
| Termination | Recessed Type N or 7-16
DIN Female at base 24� RG-213 jumper supplied with Type N model |
| MECHANICAL SPECIFICATIONS | |
| Dimensions (Total length x base ferrule diameter) | 101" L x 2.75" diam. |
| Tower weight (Antenna + clamps) | 9 lb |
| Shipping Weight | 62 lb. |
| Max. Rated Wind Velocity | 125 MPH |
| Max. Rated Wind Velocity with 0.5" radial ice |
100 MPH |
| Max. Exposed Area | 3.2 Sq. ft. |
| Lateral Thrust at 100 MPH | 128 Lb. |
| Bending Moment at top
clamp at 100 MPH (40 PSF Flat Plate Equivalent) |
803 Ft. lb. |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
