|
|
|
|
|
ANT850F10 |
 DESCRIPTION
AND FEATURES:The Telewave ANT850F10 is an extremely rugged, high-gain, fiberglass collinear antenna, designed for operation in all environmental conditions. The antenna is constructed with brass and copper elements, connected at DC ground potential for lightning impulse protection. All junctions are fully soldered to prevent RF intermodulation, and each antenna is completely protected within a high-tech ruggedized radome to ensure survivability in the worst environments. The �Cool Blue� radome provides maximum protection from corrosive gases, ultraviolet radiation, icing, salt spray, acid rain, and wind blown abrasives. MOUNTING: The ANT850F10 includes a dual clamp set for mounting to a 1.5� to 4� diameter support pipe. Stand off and top mounts are also available. |
|
SPECIFICATIONS |
| ELECTRICAL SPECIFICATIONS | |
| Power Rating (typical) | 500 Watts |
| Gain | 10 dBd |
| Frequency Range | 806-896 MHz |
| VSWR | 1.5:1 or less |
| Impedance | 50 Ohms |
| Vertical Beamwidth | 6 Degrees |
| Pattern | Omnidirectional |
| Lightning Protection | DC Ground |
| Base Termination | Recessed Type N or 7-16 DIN Female at base 24� RG-213 jumper supplied with Type N model |
| MECHANICAL SPECIFICATIONS | |
| Dimensions | 82.5" L x 2.375" diam. |
| Tower weight (Antenna + clamps) | 19 lb |
| Shipping weight | 23 lb. |
| Max. Rated Wind Velocity | 200 MPH |
| Max. Rated Wind Velocity with 0.5" radial ice | 150 MPH |
| Max. Exposed Area | 1.32 Sq. ft. |
| Lateral Thrust at 100 MPH | 53 Lb. |
| Bending Moment at top
clamp at 100 MPH (40 PSF Flat Plate Equivalent) |
106 Ft. lb. |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
