WISCO International

TPL Communications
 

Home Page | Manufacturers | TPL | Quotation Request | Search | E-mail

 

Mobile Amplifiers

 

Mobile Amplifier
 

Mobile Package Size Dimensions

Package A

7.5"L x 2.2"H x 3.7"W

Package B

7.6"L x 3.0"H x 4.5"W

Package C

9.5"L x 3.0"H x 4.5"W

Package D

11.6"L x 3.0"H x 5.5"W

General Features

  • Standard voltage is 13.8 VDC. 28 Volts is available for most models.

  • Most mobile amplifiers may be tuned for broadband operation.

  • All items shown are standard � Please inquire for information on special designs, e.g.; low input drive, higher output, other frequencies.

  • UHF connectors are standard on all mobile amplifiers through 512 MHz. Type N connectors are standard on 806-960 MHz units. Other connectors are optional.

  • Solid State Carrier Operated Relays are standard in all mobile amplifiers with the exception of VHF High Band models with outputs above 45 Watts; these models have mechanical relays. Solid State Relays for these models are optional.

  • All power specifications are nominal.

  • Specifications subject to change without notice.

MODEL POWER IN POWER OUT PACKAGE SIZE
VHF LOW Band (35-50MHz) All Low Band Units will tune to any frequency between 35 and 50MHz with +/- 1 MHz maximum bandwidth.
PA1-1AC 1- 4 W 10- 40 W A
PA1-1AC3 2- 8 W 10- 40 W A
PA1-1AE 2- 4 W 60- 100 W D
PA1-1BE 4- 8 W 60- 100 W D
PA1-1CE 8- 16 W 60- 100 W D
PA1-1DE 20- 40 W 60- 100 W D
PA1-1FE 40- 60 W 60- 100 W D
VHF MID BAND (66-88MHz) +/-2MHz Bandwidth (for export only - not type accepted)
PA2-1AD 1-4W 60-90W C
PA2-1CD 5-25W 40-100W C
VHF HIGH BAND (136-174MHz) All VHF High Band Amplifiers with the exception of the PA3-1FF and PA3-1GF models are broadband and normally cover 150-174MHz. Specify if a frequency below 150MHz is required.
PA3-1AC 1- 5 W 10-45W C
PA3-1AC-3 2- 8 W 10-45W C
PA3-1DC 8-15W 30-45W A
PA3-1AE-3 1- 3 W 70- 140 W C
PA3-1AE6 3- 6 W 70- 140 W C
PA3-1DE 8-15W 70- 140 W C
PA3-1FD 20- 40 W 70- 140 W C
UHF (400-515MHz) All UHF Amplifiers have a minimum bandwidth of +/-10MHz from specified frequency.
Minimum 100 watt output is available on special order.
PA6-1AC 1- 4 W 10- 50 W C
PA6-1AC-3 2- 8 W 10- 50 W C
PA6-1AB-3 8- 15 W 25- 50 W A
PA6-1AE 1- 3 W 75- 100 W D
PA6-1AE-3 3- 6 W 75- 100 W D
PA6-1BE 8-15 W 75- 100 W D
PA6-1FE 15- 30 W 75- 100 W D
UHF HIGH BAND (806-960MHz) All of these mobile amplifiers have a minimum bandwidth of 15MHz. Some units are available with 60MHz bandwidth.
PA8-1AA 1- 3 W 10- 20 W A
PA8-1AB 2- 5 W 20- 35 W C
PA8-1AC 1- 5 W 35- 75 W D
PA8-1DD 5- 15 W 60- 80 W D
PA8-1FD 20- 40 W 60- 80 W D
  1. TPL Commercial Amplifiers are type accepted under Parts 22 and 90. In addition, some Amplifiers are also type accepted under Part 95.
  2. Please include transmit frequency and radio power to enable TPL to tune amplifier for optimum performance. All standard units operate on 13.8 VDC.
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | TPL | Quotation Request | Search | E-mail