The latest ICOM Digital Signal
Processor technology with a compact remote head
Standard
4×8 remote controller
The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote
controller. When set up with the IC-M502 VHF radio, Icom offers you a
complete communications station.
Large LCD with dot matrix characters
You can easily read the alphanumeric name of any of the 1355 ITU channels
at a glance with the large LCD display. Nighttime operation is no problem
with 10 levels (plus OFF) adjustable backlit display and keypad.
Easy to use in all conditions
The IC-M802 offers two large dials _ bank and channel _ for
easy channel selection. Up to 16 banks of 20 (max.) each for user
channels, and 17 banks for ITU channels are available.
Built-in digital selective calling
For added safety at sea, the IC-M802 offers the latest in one-touch DSC
emergency communications technology. (ITU Class E standard.) The emergency
button is covered by a red, spring loaded hatch to avoid accidental DSC
activation.
Digital
signal processor advantage
The speech compressor, utilizing DSP, increases average talk power.
Flexible filter settings provide for narrow band signals like E-mail,
SITOR, FSK and other operation without an optional filter.
150W (PEP) of powerful output
150 Watts of power offers superior worldwide communications. A one piece,
die cast aluminum chassis and a large cooling fan allow continuous
transmission at full output power _ very important for data
communications, like e-mail.
One-touch e-mail access
An SSB first! The IC-M802 can be set to memorize your HF e-mail access
frequency, mode and bandwidth settings. At sea e-mail has never been
easier.
* Please consult with an HF e-mail provider for details.
Automatic antenna tuner, AT-140
An optional automatic antenna tuner, AT-140, easily connects to the
IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the
tuner and displays a warning indicator on the LCD.
ADDITIONAL FEATURES
- Wide band receive coverage (0.5 - 29.9999MHz)
- VFO mode is available (depending on version)
- Remote control mic allows you to select channels directly
- Accessory RS-232C port allows connection of modem, etc.
- GPS input, NMEA 0183 version 2.0 or later
- A headphone jack in front of the controller
|