WISCO International (ICOM- IC-M802 Specifications)

GENERAL

Frequency coverage
(Unit; MHz)

: Rx 0.5 - 29.9999
Tx 1.6 - 2.9999, 4.0 - 4.9999, 6.0 - 6.9999, 8.0 - 8.9999, 12.0 - 13.9999, 16.0 - 17.9999, 18.0 - 19.9999, 22.0 - 22.9999, 25.- 27.5000

Type of emission

: J3E(SSB), J2B(AFSK), F1B(FSK), A1A(CW), H3E(AM*; Rx Only),

Number of channels

: 1355 (max.)
(160 user programmable; 249 ITU SSB duplex; 72 ITU SSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU 4MHz simplex; 31 ITU 8MHz simplex)

Power supply requirement

: 13.6 V DC ±15% (neg. ground)

Current drain
(at 13.6 V DC)

: Tx max. power
RX (Max. audio output)

30 A (typ.)
3.0 A

Operating temperature range

: -30°C to +60°C; -22°F to +140°F
(Guaranteed range: -20°C to +60°C; -4°F to +140°F)

Antenna impedance

: 50Ω (SO-239)

Dimensions
(proj. not incl.)

: Main unit: 240(W) × 94(H) × 238.4(D) mm; 9⁷/₁₆(W) × 3¹¹/₁₆(H) × 9³/₈(D) in
Controller: 220(W) × 110(H) × 84.4(D) mm; 8²¹/₃₂(W) × 4¹¹/₃₂(H) × 3⁵/₁₆(D) in
Speaker: 110(W) × 110(H) × 84.4(D) mm; 4¹¹/₃₂(W) × 4¹¹/₃₂(H) × 3⁵/₁₆(D) in

Weight

: Main unit: 4.7 kg; 10.36lb
Controller: 570g; 1.26lb
Speaker: 370g; 0.81b

TRANSMITTER

Output power

: 150, 60, 20W PEP (Selectable)

Spurious emissions

: -62 dB

Unwanted sideband

: 55dB

Carrier suppression

: 40dB

Microphone impedance

: 2.4kΩ

RECEIVER

Sensitivity
(at 10dB S/N)

Frequency Range	J3E, A1A	J2B, F1B	H3E	DSC(J2B)
0.5-1.5999MHz	6.3µV	-	32µV	0.5µV (at 1% error rate)
1.6-1.7999MHz	0.89µV	0.89µV	6.3µV
1.8-3.9999MHz	0.5µV	0.5µV	3.2µV
4.0-29.999MHz	0.5µV	0.5µV	-

Spurious response
rejection ratio

: More than 70dB (1.6 - 29.9999MHz)

Audio output power

: 4 W typ. at 10% distortion with a 4 ohm load

Audio output impedance

: 4-8 ohm

Clarity variable range

: ±150Hz

GPS interface

: NMEA0183 version 2.0

All stated specifications are subject to change without notice or obligation.