 |
|
|
|
|
|
Specifications |
| General |
VHF model |
UHF model |
| Frequency Range |
148-174 MHz |
450-480 MHz |
| Systems | 200 | |
| Groups LTR | 25 per System | 32 per System |
| Channels: Conventional |
14 per System |
16 per System |
Channel Spacing |
30 / 25 / 15 / 12.5 kHz |
|
| PLL Step |
5.0 / 6.25 / 7.5 kHz |
5.0 / 6.25 kHz |
| Channel Spread | 26 MHz | 30 MHz |
| Antenna Impedance | 50 W | |
| Input voltage |
110 V / 220 V AC |
|
| Current Drain Standby Receive Transmit |
< .15 A < .5 A < 10A |
|
| Operating Temperature | -22�F to +140�F (-30� C to +60� C) | |
| Frequency Stability (-30� C to +60� C) |
� /-2.5 ppm | |
| Dimensions (W x H x D) | 7.1875" x 4.5" x 7.75" (183 x 144 x 197 mm) | |
| Weight | 6.8 lbs. | |
| FCC Identifier | F3JSM6150V2 |
F3JSM6450U6 |
FCC Compliance |
Parts 22, 74, 90 |
Parts 22, 74, 80, 90, 95 |
| IC Certification Number | 3772195714A | 153 195 653A |
|
RECEIVER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
|
Sensitivity (12 dB SINAD) |
|
|
| Selectivity |
62 dB @12.5 kHz; 72 dB @ 25 kHz |
|
| Intermodulation |
72 dB @12.5 kHz; 72 dB @ 25 kHz |
|
| Spurious Response | 75 dB |
|
| Audio output |
4W (Int.) @ 16W;
10W (Ext.) @ 8W |
|
|
TRANSMITTER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
| RF Output 148-174 MHz 450-470 MHz 471-480 MHz |
|
|
| Spurious and harmonics Emissions | 75 dB |
|
| Modulation |
16KOF3E, 11KOF3E |
|
| FM Hum and Noise | 36 dB @ 12.5 kHz; 42 dB @ 25 kHz |
|
| Audio distortion |
2% (Int.); <10% (Ext.) |
|
|
Each SB6000 Base Station
includes: One SM-6150 (VHF) or SM6450 (UHF) Mobile Radio, 10 Amp Power Supply (MS-0730), Base Station Desktop Microphone (ACC-702) and Housing / Shroud (ACC-450) |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
