|
|
Home Page | Manufacturers | Vertex | VX-2500 | Quotation | Search | E-mail |
VX-2500 Conventional |
General |
VX-2500V |
VX-2500U |
Frequency Range |
134-160 MHz (A) 148-174 MHz (C) |
400-430 MHz (AS1) 450 - 490 MHz (D) 480-512 MHz (F) |
Number of Groups |
10 |
|
Number of Channels |
128 |
|
PLL Steps |
2.5 / 5.0 / 6.25 kHz |
5.0 / 6.25 kHz |
Power Supply Voltage | 13.8V DC �15% | |
Channel Spacing |
25 / 12.5kHz |
|
Current Consumption |
TX: 6 A |
|
Operating Temperature Range |
�22� F to +140� F (�30� C to +60� C) |
|
Frequency Stability |
Better than �2.5 ppm |
|
RF Input-Output Impedance |
50 Ohms |
|
Audio Output Impedance |
4 Ohms |
|
Dimensions (W x H x D) |
6.4" x 1.6" 4.4" (160mm x 40mm x 110 mm) |
|
Weight (Approx.) |
1.87 lbs (0.85 kg) |
|
Receiver (Measurements made per TIA/EIA-603-A) |
||
Circuit Type |
Double Conversion Super-heterodyne |
|
Sensitivity (12 dB SINAD) |
0.25 uV |
|
Adjacent Channel Selectivity |
80/70 dB |
80/67 dB |
Intermodulation |
75 dB |
|
Spurious and Image Rejection |
90 dB |
|
Audio Output |
4 Watts @4 Ω 5% THD |
|
Audio Distortion |
<3% @ 1 KHz |
|
Transmitter (Measurements made per TIA/EIA-603) | ||
Power Output |
25 Watts (Low: 5 W) |
|
Modulation |
16KOF3E, 11KOF3E |
|
Max. Deviation |
�5.0 / 2.5 KHz |
|
Conducted Spurious Emission |
70 dB below carrier |
|
Audio Distortion |
<3 % @1 kHz |
|
Microphone Type |
Dynamic |
|
Microphone Impedance |
600 Ω |
APPLICABLE MIL-STD |
Standard | MIL 810C Methods/Procedures |
MIL 810D Methods/Procedures |
MIL 810E Methods/Procedures |
Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Vibration Shock |
501.1/Procedure I, II |
500.2/Procedure I |
500.3/Procedure I |
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |